Finished Design

All it takes is a quick scroll through Instagram to know that flames are hot in the world of nail art right now. Here at The Edge we tasked our technical team with putting together a super simple fluorescent flames tutorial. Follow the below step-by-step guide to create your very own scorching design.

STEP ONE

Step One

Paint two coats of It's All White soak off gel polish from our Gelover range and cure

STEP TWO

Step Two

Apply Over The Top soak off gel topcoat from our Gelover range and cure

STEP THREE

Step Three

Using Gel Wipe Off Solution wipe away the tacky layer of the gel

STEP FOUR

Step Four

Using the Fine Detailer Brush create your flames using the White Creative Nail Art Gel , paint on your flames and cure. For a more detailed tutorial on how to paint your flames check out our recent Instagram video

STEP FIVE

Step Five

Using either your finger, a lint free sponge or an eyeshadow applicator, rub the Fluorescent Powder onto your flame design. The powder should only stick to the tacky layer of your flame design however we will tidy this up in step six

STEP SIX

Step Six

Use a One Stroke Brush and Gel Wipe Off Solution to tidy up any over spill around the design

STEP SEVEN

 Step Seven

Apply Over The Top gel top coat and cure

STEP EIGHT

Step Eight

Wipe of the tacky layer using Gel Wipe Off Solution and enjoy your show stopping flames!

Finished look